PstryPtak Posted October 12, 2009 Share Posted October 12, 2009 (edited) Welcome I have several cards DVB-S2: TechnoTrend Budget S2-3200 TechniSat SkyStar S2 PCI Hauppauge WinTV-HVR 4000 Hauppauge is the best from them. And DVBViewer with this card just has the problem from these DVB-S2 transponders: Astra 19.2E: 10862MHz, H, 22000, QPSK, 5/6 HotBird 13E: 11279MHZ, V, 27500, 8PSK, 3/4 11449MHZ, H, 27500, 8PSK, 3/4 Parameters transponders and the antenna Installation is OK (with original software WinTV, card haved strange signal with this transponders). I tried Pro version and beta of DVBViewer. When I use the programme from the site Hauppauge (WinTV) this the card receives these transponders without the problems. When I install inside computer different cards (TechnoTrend Budget S2-3200 or TechniSat SkyStar S2 PCI), I receive this transponders in DVBViewer and ScanEdit without problems. I tried change Hardware parameters, but still not receive this transponders with Hauppauge card. support.zip Edited October 12, 2009 by PstryPtak Quote Link to comment
PstryPtak Posted November 10, 2009 Author Share Posted November 10, 2009 The problem exists in the the newest version continually. In original program (VinTV) card work perfectrly with this transponders. In DVBViewer unfortunately not. Quote Link to comment
Derrick Posted November 10, 2009 Share Posted November 10, 2009 Parameters transponders ... is OK ..not quite. At least 13E, 11449H is wrong. The correct FEC is 2/3 Try with transedit Quote Link to comment
PstryPtak Posted November 11, 2009 Author Share Posted November 11, 2009 I already tried various parameters in this transponders and TransEdit. This nothing he does not change. Hauppauge in DVBViewer continually he does not receive this transponders. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.